Rabu, 26 November 2014

Bluetooth Enabling/Pairing Guide on iPhone 6 and iPhone 6 Plus

Bluetooth Enabling/Pairing Guide on iPhone 6 and iPhone 6 Plus - The Acer Swift 3 is a near-perfect laptop for those who want an ultraportable, but don’t want to fork out £1000+. Build quality is great, battery life very good, and performance a match for much more expensive laptops. There are just two areas where the low price shows. First, it's a little thicker and heavier than some ultrabooks. It looks good enough, but limited maximum brightness and fairly poor colour reproduction limits its usefulness in certain situations. done a pretty good, well we have collected a lot of data from the field directly and from many other blogs so very complete his discussion here about Bluetooth Enabling/Pairing Guide on iPhone 6 and iPhone 6 Plus, on this blog we also have to provide the latest automotive information from all the brands associated with the automobile. ok please continue reading:

Need help using Bluetooth with your new iPhone 6  or iPhone 6 Plus smartphone? Well, this guide is for you.

In this tutorial, we elaborate the basic steps to enable Bluetooth function on the new iPhones using the Settings menu. And to give you a clear hint on how to use or pair your iPhone with another Bluetooth-enabled device, we also offer Bluetooth pairing instructions.

Let's get started right away.

Step 1. Enable Bluetooth function on your iPhone 6/6 Plus


In order to use Bluetooth to share or transfer contents between devices, you need to enable or activate the functionality beforehand. To enable or turn on Bluetooth on the iPhone 6, follow these steps:

a. Tap on Settings from the Home screen.
b. Set Bluetooth feature ON.

Step 2. Enable Bluetooth Discovery mode


Follow these steps to set your iPhone and accessory into Bluetooth Pairing mode:

//On your iPhone device

1. Tap on Settings from the Home screen.

2. Tap on Bluetooth.

3. Tap the Bluetooth switch to enable it or turn the feature ON. When the switch turns green, it's on and ready for use.

When Bluetooth is turned on, Bluetooth discovery mode will likewise, be enabled automatically.

//On your Bluetooth accessory/device

1. Power on your accessory or other device you want to pair.

2. Wait for the status light to become steadily lit in blue and when the voice that says 'ready to pair' prompts.

3.  Now, proceed with device pairing steps.


Step 3. Pair iPhone 6 with a Bluetooth Accessory/Device


1. Tap on Settings from the Home screen of your iPhone 6.

2. Select Bluetooth.

3. Next, put the accessory or other Bluetooth device in pairing mode.

4. Select the accessory/device on your iPhone.

5. If prompted, enter its passkey or PIN number to connect. Normally, the passkey is 0000 or 1234.

When both devices are successfully paired, you may now start sharing files or contents from or to your iPhone 6/6 Plus.

Tidak ada komentar:

Posting Komentar